Hire Or Buy Equipment? How To Calculate Your Break-Even Point
Updated: 20 hours ago
You need a projector for Thursday. It’s £65 to hire or £900 to buy. There were eight presentations in last year’s diary, so it’s tempting to put eight lots of £65 towards buying your own. Then you pull the invoices. Two presentations ran on each booking. You only paid for four days.
To decide whether to hire or buy equipment, compare the hire bills you would actually avoid with the full cost of owning the same kit over the same period. In the two-year example below, hiring and buying cost the same at 12 paid days. Buying first saves money on day 13. A weekly hire rate, a lower resale price or a different pattern of bookings can move that point.

Start with the bookings you would actually replace
Put last year’s hire invoices beside the diary. On each invoice, mark the model, the dates, the billing unit and the total you paid. Then match the jobs to those bookings. Equipment utilisation tells you how much of the available time a machine was used. Your invoices tell you how much of that time you had to pay for. Add any dates secured by a new contract separately.
Two jobs on the same hire. A morning briefing and an afternoon demonstration can share one paid day. Owning the projector would avoid one hire charge.
A job you did without the kit. A last-minute demo shown on a laptop generated no hire bill. Put it on a separate list of occasions when having your own projector might have helped.
A job that needs a different model. If the meeting-room projector is too dim for your annual conference, keep the conference hire in both budgets. Buying the smaller unit cannot remove that bill.
If you sell equipment as well as hiring it out, ask a repeat hirer what kept them hiring last time. A room-size problem calls for advice about the model. A buyer wondering how often they would use their own needs a different answer. Capture their wording in your sales objection map.
How to calculate the hire or buy break-even point
Choose a period you can sensibly forecast, such as the two years left on a contract. Use the same specification, accessories, service level and VAT basis on both sides. If the hire includes delivery, setup or a replacement after a breakdown, find out what it would cost you to provide the equivalent when you own the kit.
Work out the cost of ownership
Net cost to own = purchase price + extra costs of ownership over the period − net resale proceeds. Include the servicing, insurance, repairs, storage or transport that buying would add. For resale, use what you could reasonably receive after selling fees and collection costs. The European Rental Association’s total cost of ownership calculator lets equipment buyers explore buying, renting and leasing in more detail.
Include only costs that change. If the same employee needs the same two hours to operate the equipment either way, those hours cancel out. An extra trip to the hire depot belongs on the hire side. If you already used purchase price less resale value, adding depreciation again would count the loss in value twice. ACCA’s guide to relevant costs explains the cash-flow reasoning.
Divide by the saving on each paid hire day
Break-even days = fixed net ownership cost ÷ (hire cost avoided per day − extra cost per day when owned). This shortcut works when the saving per day stays the same. If the owned kit consumes £5 more per day than the hired equivalent, a £65 hire avoided saves £60. If the saving is zero or negative, extra days alone will never repay a positive upfront cost. For weekly tariffs or delivery charged per booking, price the actual bookings instead.
When does buying a £900 projector beat hiring at £65 a day?
These figures are illustrative. The projector costs £900 upfront. Two years of fixed upkeep and cover add £180. Assume £300 net resale proceeds, the same running costs either way, no delivery charges and a flat £65 per paid hire day. The two-year cost of owning is £900 + £180 − £300 = £780. Dividing £780 by £65 gives 12 paid days.
Paid hire days over two years | Hire bill and decision |
8 days | £520 to hire. Hiring saves £260. |
12 days | £780 to hire. Both options cost £780. |
13 days | £845 to hire. Buying saves £65. |
16 days | £1,040 to hire. Buying saves £260. |

Four paid days a year gives eight over two years. That buyer is £260 better off hiring on the stated costs. They would also need the £900 purchase price now. The £300 resale estimate only becomes cash when they sell. This example assumes a cash purchase and leaves out financing, tax effects and the time value of money.
What if the supplier charges by the week?
Five days of use can produce two different hire bills. Projector Hire Bristol’s published price list, checked on 21 November 2026, lists the NEC M353WS at £90 per day or £270 per week, excluding VAT. That is a separate supplier example. The £65 illustration above uses a flat rate.
Five consecutive working days covered by one weekly hire come to £270. Five separate one-day bookings in different weeks come to £450 on the listed daily rate, before extras. That £180 difference comes entirely from how the dates fall. For your own comparison, give the supplier the dates, including pickup and return, and ask for the total in writing.

Check when the hire clock stops. For example, Speedy’s UK hire terms set conditions around the off-hire number and the return or collection of the equipment. Finishing work on Friday afternoon and returning the kit on Monday can be different events on the invoice. Your supplier’s terms decide what is chargeable.
What would you do with equipment you already owned?
Go back to the demonstration you gave on a laptop. Owning the projector wouldn’t have saved £65 that day. It might have let the customer see the design at full size and approve it in the room. That is a different reason to buy, and it deserves its own calculation.
In the eight-day example, ownership costs £260 more. Suppose the team can name eight additional demonstrations it would realistically run over two years. £260 ÷ 8 = £32.50 per extra demonstration. That is the average additional value each would need to deliver, after its direct costs, to justify the premium. It’s a threshold to test. No extra sale or saving has been assumed.
Ask what would actually change. Would you avoid a second visit, free up a colleague’s time for paid work or deliver a job you usually turn down? If the team can only name two extra demonstrations, the figure becomes £130 each. If all they can name is Thursday, hiring for Thursday is a perfectly sound decision.
Use EndorseHQ to show buyers what changed after a customer bought
The calculation answers “How often would I need it?” A customer who hired the same model before buying can tell you how often it actually came off the shelf. That’s the experience a prospective owner is looking for when both prices are on the screen.
Ask for an experience the next buyer can test against their own
Before buying. Over what period did you hire this model? Which bookings did it cover, and what did you do when it wasn’t available?
After buying. Over a comparable period, which uses replaced a paid booking? Can you remember one occasion when having it on hand let you do something extra?
What else changed? Did you gain a new contract or hire a new team? Is there a job you still rent a different model for? Keep that qualification in the review.
Use the customer’s words and get permission for this placement. If they give no usage count, leave it out. Keep their original feedback and the evidence behind any objective savings claim you repeat. ASA and CAP guidance on testimonials sets out what advertisers need to hold.

Put the review where the equipment decision happens
Find the right customer. In the EndorseHQ Toolkit, import or add the permission-cleared review. Tag it by the decision it answers, such as ‘hired before buying’, and the model where that detail matters.
Display both prices together. Select that review in a Singular widget. Place it below the hire and purchase prices and above the two actions. On a phone, a buyer should be able to see which model and prices the story refers to, then choose either route.
Check what buyers choose. Compare completed hires and purchases per 100 visitors to that model’s comparison page before and after the change. Use the same decision window, include attributable phone orders and check the contribution from both routes after direct costs. Note stock or price changes. EndorseHQ widget views and clicks show engagement. Your paid orders show what customers chose.
Start with one model that people repeatedly hire after asking about buying. If you have several reviews to choose from, use the guide to matching testimonials to buyer questions. The one worth placing is the one that helps the next buyer recognise their own pattern of use.
Equipment hire or purchase FAQs
How often do you need to use equipment before buying makes sense?
Count the paid hire bookings that owning a suitable model would replace. In the £65 example, six separate hire days a year for two years gives 12 days and a tie. A thirteenth day makes buying cheaper. Six sessions covered by two bookings a year would only replace four paid days over the same period. Start with invoices and confirmed dates, then check what happens if demand drops.
What hidden costs should I check on an equipment hire quote?
Ask for delivery, collection, minimum hire, weekend or late-return charges, damage waiver, any excess, cleaning and consumables. Find out which accessories come with the model. Include amounts you expect to pay in the hire total. A fully refundable deposit affects the cash you need at booking. Only an amount you expect to forfeit belongs in the cost comparison.
Is buying second-hand equipment cheaper than hiring it?
It can be. Compare the used purchase price, likely repairs, remaining service life, warranty cover and realistic net resale value with the hires it would replace. Ask for maintenance records and check the exact model can do the job. If it fails during a booked job, include the cost of temporary replacement where that would fall to you. A cheap unit that leaves you hiring another one can work out expensive.
What happens if the equipment sells for less than you expect?
Reduce the resale figure and run the comparison again. With zero resale proceeds, the illustrative projector costs £1,080 to own. Sixteen paid days at £65 cost £1,040, so hiring is still cheaper. At 17 days, hire costs £1,105 and owning is £25 cheaper. If your decision depends on achieving a particular resale price, check comparable completed sales and likely selling costs.
What if I need the equipment regularly but only for one project?
Price the whole project as one hire and compare it with buying for the same period. Get the weekly or project rate and the cost of extending it if the finish date slips. On the purchase side, include storage between jobs, a realistic resale price at the end and the time it might take to find a buyer. A busy six-week project can favour a block hire even if every working day is booked.
Is hiring equipment the same as leasing or hire purchase?
Short-term hire covers an agreed booking, after which you return the equipment. A lease gives you use for an agreed term under its own payment and return conditions. Hire purchase is a credit agreement that can lead to ownership once the required payments and any purchase option are settled. Compare the deposit, total payments, fees and end-of-term arrangements over the same period. The British Business Bank explains leasing and hire purchase.